Motul 7100 20W50

TYPE OF USE

High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with 4

stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2 or Euro 3 emission

regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust

pipe...

Grade 50 at hot temperature especially suitable for big bore engines thumpers, twins…

Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s…

PERFORMANCE

STANDARDS API SN / SM / SL / SJ / SH / SG

SPECIFICATIONS JASO MA2 under N° M033MOT120

Meets Harley Davidson specifications

Protection

Ester Technology :

- Low traction coefficient Ester to minimize engine internal friction losses and improve

- Synergy of Ester with anti-wear additives and improved shear resistance for improved gear

protection and life time.

100% Synthetic lubricant for improved oil film resistance at high temperatures and high revs.

Optimized Phosphorus and Sulphur content (JASO MA2 < 1200 ppm) for better operating conditions of

catalytic converters.

The innovative anti-wear additives package provides outstanding gearbox protection. FZG Gear Test

results: Pass FLS>14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid

lubricating and wear protection properties at the interface of a loaded set of gears. Lubricants are then

graded based on their “Failure Load Stage” or FLS rating from FLS 1 (very poor result) up to FLS 14

(outstanding result).

Comfort

JASO has created its own 4-stroke motorcycle standard -JASO T903- which has three grades MA, MA1

and MA2.

JASO MA2 offers the most efficient friction levels to guarantee the clutch engagement during the three

riding modes: Starting, Acceleration and Constant speed.

RECOMMENDATIONS

Drain interval: according to manufacturers’ recommendations and tune to your own use.

Can be mixed with synthetic or mineral lubricants.

PROPERTIES

Color Visual Red

Viscosity grade SAE J 300 20W-50

Density at 20°C (68°F) ASTM D1298 0.864

Viscosity at 40°C (104°F) ASTM D445 126.5 mm²/s

Viscosity at 100°C (212°F) ASTM D445 18 mm²/s

Viscosity index ASTM D2270 158

Pour point ASTM D97 -30°C / -22°F

Flash point ASTM D92 236°C / 456.8°F

TBN ASTM D2896 8.4 mg KOH/g