Motul 7100 15W50

To find the oil that best suits your bike click here

TYPE OF USE

High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with

4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2 or Euro 3

emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection

into exhaust pipe...

Recommended for specific DUCATI, KTM, BMW engines requiring SAE 15W-50 viscosity grade oil.

Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s…

PERFORMANCE

STANDARDS API SN / SM / SL / SJ / SH / SG

SPECIFICATION JASO MA2 under N° M033MOT125

Protection

Ester Technology:

- Low traction coefficient Ester to minimize engine internal friction losses and improve

performance

- Synergy of Ester with anti-wear additives and improved shear resistance for improved gear

protection and life time.

100% Synthetic lubricant for improved oil film resistance at high temperatures and high revs.

Optimized Phosphorus and Sulphur content (JASO MA2 < 1200 ppm) for better operating conditions of

catalytic converters.

The innovative anti-wear additives package provides outstanding gearbox protection. FZG Gear Test

results: Pass FLS>14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates

fluid lubricating and wear protection properties at the interface of a loaded set of gears. Lubricants are

then graded based on their “Failure Load Stage” or FLS rating from FLS 1 (very poor result) up to FLS

14 (outstanding result).

Comfort

JASO has created its own 4-stroke motorcycle standard -JASO T903- which has three grades MA, MA1

and MA2.

JASO MA2 offers the most efficient friction levels to guarantee the clutch engagement during the three

riding modes: Starting, Acceleration and Constant Speed.

RECOMMENDATIONS

Drain interval: according to manufacturers’ recommendations and tune to your own use.

Can be mixed with synthetic or mineral lubricants.

PROPERTIES

Color Visual Red

Viscosity grade SAE J 300 15W-50

Density at 20°C (68°F) ASTM D1298 0.864

Viscosity at 40°C (104°F) ASTM D445 126.5 mm²/s

Viscosity at 100°C (212°F) ASTM D445 18.0 mm²/s

Viscosity Index ASTM D2270 158

Pour point ASTM D97 -30°C / -22°F

Flash point ASTM D92 236°C / 456.8°F

TBN ASTM D2896 8.4 mg KOH/g