Motul 5100 10W30

To find the oil that best suits your bike click here

TYPE OF USE

Street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox

or not, wet or dry clutch, engines designed to run a low viscosity lubricant, engines meeting Euro 2 or

Euro 3 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air

injection into exhaust pipe...

Recommended for specific HONDA, YAMAHA engines requiring SAE 10W-30 viscosity grade oil.

Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s....

PERFORMANCE

STANDARDS API SM / SL / SJ / SH / SG

SPECIFICATION JASO MA2 under N° M033MOT111

Protection

Technosynthese® lubricant reinforced by Ester base stock to warranty anti-wear properties and improve

gear protection and life time.

Improved oil film resistance at high temperatures for engine durability.

Optimized Phosphorus and Sulphur content (JASO MA2 < 1200 ppm) for better operating conditions of

catalytic converters.

The innovative anti wear additives package provides excellent gearbox protection. FZG Gear Test

results: Pass FLS 14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid

lubricating and wear protection properties at the interface of a loaded set of gears.

Comfort

JASO has created its own 4-stroke motorcycle standard -JASO T903- which has three grades MA, MA1

and MA2.

JASO MA2 offers the most efficient friction levels to guarantee the clutch engagement during the three

riding modes: Starting, Acceleration and Constant Speed.

RECOMMENDATIONS

Drain interval : according to manufacturers’ recommendations and tune to your own use.

Can be mixed with synthetic or mineral lubricants.

PROPERTIES

Colour Visual Green

Viscosity grade SAE J 300 10W-30

Density at 20°C (68°F) ASTM D1298 0.871

Viscosity at 40°C (104°F) ASTM D445 74.6 mm²/s

Viscosity at 100°C (212°F) ASTM D445 11.5 mm²/s

Viscosity Index ASTM D2270 147

Pour point ASTM D97 -36°C / -32.8°F

Flash point ASTM D92 226°C / 438°F

TBN ASTM D2896 7.5 mg KOH/g